OIL TEK WELL SERVICES and PRODUCTS

International Rubber Products is proud to offer the following OILTEK well service expendables.

Type “L” Tubing Swab Cup

The Type “L” swab cup is designed for light loads. Our proprietary compounds are bonded to either an aluminum or steel insert. The Type “L” cup is best suited for fluids with a high concentration of suspended sand.

Part No. Size Insert Cup OD
200LA 2-3/8" Aluminum 1.950"
200LS 2-3/8" Steel 1.950"
250LA 2-7/8" Aluminum 2.420"
250LS 2-7/8" Steel 2.420"
300LA 3-1/2" Aluminum 2.980"
300LS 3-1/2" Steel 2.980"

Type “M” Tubing Swab Cup

The Type “M” swab cup has atypical lips and is designed for medium loads. Our proprietary compounds are bonded to either an aluminum or steel insert. The Type”M” swab cup has 33% more wiping surfaces than most similar cups on the market.

Part No. Size Insert Cup OD
200MA 2-3/8" Aluminum 1.960"
200MS 2-3/8" Steel 1.960"
250MA 2-7/8" Aluminum 2.410"
250MS 2-7/8" Steel 2.410"
300MA 3-1/2" Aluminum 2.940"
300MS 3-1/2" Steel 2.940"

Type “Vee” Casing Cup

The Type “Vee” casing cup is a single lip all rubber cup bonded to a steel insert. The cups are stacked for best results and are uses primarily for oil or water wells.

Part No. Size Insert Cup OD
400VC 4-1/2" Steel 4.000"
500VC 5-1/2" Steel 4.950"
700VC 7" Steel 6.475"

Pipe Wipers

The Oiltek pipe wiper has pipe run through it to wipe away all debris from the surface of the pipe. A highly abrasion and oil resistant compound is molded over a steel ring to give the wiper rigidity for numerous runs and is available in various pipe size, diameters and thicknesses.

9″ Thin Pipe Wiper

Part No. Pipe Size
09BJ238PW 2-3/8"
09BJ278PW 2-7/8"
09BJ312PW 3-1/2"
09BJ412PW 4-1/2"

9″ Thick Pipe Wiper

Part No. Pipe Size
09238PW 2-3/8"
09278PW 2-7/8"
09312PW 3-1/2"
09412PW 4-1/2"

17″ Flat Pipe Wiper

Part No. Pipe Size
17238PW 2-3/8"
17278PW 2-7/8"
17312PW 3-1/2"
17412PW 4-1/2"

Oil Saver Rubbers

The Type “H” Oil Saver rubber is compounded with specially formulated material to optimize wear and oil resistance. Blue softer material is available for colder temperatures.

Part No. Size Durometer
OS916 3/8"-5/8" Black 50
OS916B 3/8"-5/8" Blue 40

Sucker Rod Wipers

Part No. Size
58SRW 5/8"
34SRW 3/4"
78SRW 7/8"
1SRW 1"

JU Style Stripper Rubber

The JU Style stripper is a resilient abrasion resistant rubber that cleans oil and other debris while running or pulling tubing under pressure when using the appropriate stripper.

Part No. Size
200JU 2-3/8"
250JU 2-7/8"
300JU 3-1/2"

Regan Style Rubber Type “K”

Part No. Size
300TRK 3"

Packer Cup

The Oiltek packer cup is a highly abrasion resistant wire or flexible petal (see insert) reinforced cup generally used in fracturing wells. Locally machined bases, petals and wires are used to manufacture these cups ensuring consistent and superior quality.

Part No. Size Casing Wt
400PC 4-1/2" 9.5-11 lb/ft
700PC 7" 17-23 lb/ft

OILTEK “QRC” Style Ram Fronts

Part No. Description
238QRC-SAF 2-3/8" QRC – Safety
238QRC-STR 2-3/8" QRC – Stripping
278QRC-SAF 2-7/8" QRC – Safety
278QRC-STR 2-7/8" QRC – Stripping
318QRC-STR 3-1/8" QRC -Stripping
312QRC-SAF 3-1/2" QRC – Safety
312QRC-STR 3-1/2" QRC – Stripping
CSOQRC QRC CSO

OILTEK “Sentinal II” Style Ram Fronts

Part No. Description
238SentII 7-1/16" x 2-3/8" Sentinel II Ram Front
278SentII 7-1/16" x 2-7/8" Sentinel II Ram Front
312SentII 7-1/16" x 3-1/2" Sentinel II Ram Front
CSOSentII 7-1/16" x Sentinel II CSO Ram Front
SentII TS 7-1/16" Sentinel II Top Seal

Packer Replacement Elements

The Oiltek replacement elements are available in durometers ranging between 60 and 90 and are available in either NBR or HNBR.

AST Style

Note: XXxx Denotes Durometer/material

Part No. Description Alternate Part #
180-BS-525x475x113-XXxx 9-5/8" x 4-1/2" Bonded Seal 600-95-52A
180-BS-60040520-XXxx 600-40-520 4 x 1.90" AS1X Bonded Seal 600-40-520
180-BS-60045520-XXxx 600-45-520 4-1/2" x 2-3/8" AS1X Bonded Seal 600-45-520
180-BS-60255520-XXxx 600-55-520 5-1/2" x 2-3/8" AS1X Bonded Seal 600-55-520
180-BS-60256520-XXxx 600-56-520 5-1/2" x 2-7/8" AS1X Bonded Seal 600-56-520
180-BS-60272520-XXxx 600-72-520 7" x 2-7/8" AS1X Bonded Seal 600-72-520
180-BS-60273520-XXxx 600-73-520 7" x 3-1/2" AS1X Bonded Seal 600-73-520
180-EL412-XXxx 4-1/2" 9.5-13.5# Element 602-45-5xx
180-EL501AST-XXxx 5" 11.5-18# AST Style Element 602-50-5xx
180-EL550AST-XXxx 5-1/2" 14-17# AST Style Element x 2-3/8" ID 602-55-5xx
180-EL550AST-OS-XXxx 5-1/2" 14-17# AST Style Element OS x 2-7/8" ID 602-56-5xx
180-EL552AST-XXxx 5-1/2" 13-15.5# AST Style Element x 2-3/8" ID
180-EL552AST-OS-XXxx 5-1/2" 13-15.5# AST Style Element OS x 2-7/8" ID 602-58-5xx
180-EL700AST-XXxx 7" 26-32# Element AST Style x 2-7/8" ID 602-70-5xx
180-EL700AST-OS-XXxx 7" 26-32# Element AST Style OS ID x 3-1/2" ID 602-73-5xx
180-EL701AST-XXxx 7" 17-26# Element AST Style x 2-7/8" ID 602-72-5xx
180-EL701AST-OS-XXxx 7" 17-26# Element AST Style OS ID x 3-1/2" ID 602-74-5xxA
180-EL850AST-XXxx 8-5/8" 24-28# Element AST Style 602-87B-5xx/602-81
180-EL851AST-XXxx 8-5/8" 32-40# Element AST Style 602-87A-5xx / 603-82
180-EL950AST-XXxx 9-5/8" 32-43.5# Element AST Style 602-96-5xx
180-EL951AST-XXxx 9-5/8" 43.5-57# Element AST Style 602-95-5xx
180-EL951bAST-XXxx 9-5/8" 43.5-57# EL(5.95" ID) AST Style 607-95-5xx

BPR Style
Our BPR Elements are a median style. There is no need to stack ends and centers; the complete stack is identical to that of a combination

Part No. Description OD ID L
EL51213155BPR-M 5-1/2" 13-15..5# BPR Style Element 4.68" 3.13" 2.50"
EL51213155-OS-BPR-M 5-1/2" 13-15..5# BPR OS Style Element 4.68" 3.325" 2.50"
EL5121417BPR-M 5-1/2" 14-17# BPR Style Element 4.50" 3.13" 2.50"
EL71720BPR 7" 17-20# BPR Style Element 6.10" 4.10" 2.55"
EL72029BPR-M 7" 20-29# BPR Style Element 5.75" 4.12" 2.40"
EL8583249BPR 8-5/8" 32-49# BPR Style Element 7.50" 5.50" 2.88"
EL9582936BPR 9-5/8" 29-36# BPR Style Element 8.30" 6.50" 2.86"